Friday, July 24, 2015

D&RGW 3600 Locomotives




D&RGW 3600 LOCOMOTIVES

by Dave Straight and John Hill

3600’s. Mention that number series and those who follow the Denver and Rio Grande’s steam locomotive fleet will smile and fondly remember the 2-8-8-2 articulated giants, the world’s largest at their construction in 1927. Built by the American Locomotive Company, the first ten were class L131 numbered 3600 through 3609 and followed by class L132 numbered 3610 through 3619 built in 1930. 131,800 pounds of tractive effort, 63" diameter drive wheels, 26" x 32" cylinders and weighing in at 649,000 pounds. I remember being told that for every four scoops of coal into the firebox, one went straight up the smokestack.

Sadly all met with the scrapper's torch in 1955 and 1956, five in 1955, engines 3600, 3603, 3614, 3617 and 3618, the remainder in 1956 with none saved for posterity. Unfortunately, this was the same for all but one locomotive of the D&RG standard gauge steam fleet. 

Author Dave Straight met several engineers, hostlers and the like while out photographing the final days and hours of the great beasts. Here are a couple of anecdotes from the fellows he met as well as himself; 

“A hoghead named Alvie Powell, brought the first 3600 into Phippsburg, Colorado approximately in  1947. Alvie was an engineer who worked over the hill in the D&SL Days. He was quite a character, and he liked the 3600’s.”
“The last two 3600's under steam were: the 3609 and the 3619. Ironically the last 2 numbered engines in each class. Sadly enough, the last day they operated, was Oct. 27th,1956. They left Tabernash that afternoon. Joe Preiss and Flory Iacovetto, engineer and fireman respectively. Both were D&SL employees. Joe was a veteran from the days on the line over Corona/Rollins Pass." 
“About a week before their leaving Tabernash, A hostler let me up in the cab of the 3609."Just don't touch anything!" they told me. But I got to blow the whistle. I can't tell you how much of a charge I got out of that. Later on, we went over to a little diner across the highway. The cook had a little, black & white TV set on. It looked like a blizzard on Corona Pass! His rabbit ears antenna weren't much good. He started lamenting about those (censored) steam engines and how their steam generator "jacked up the reception." Plus the fact, some (censored) was blowing the whistle! Of course, needless to say I kept my mouth shut for a change. What a sight to see the 3609 pound out of Tabernash, tied to the tail of a Moffat Tunnel freight. ‘Twas quite a day.” 
“Another character said he had a 3600 running at 75MPH, that’s right, 75MPH between Flat and Troublesome. If you’re not familiar with those names they are between Kremmling and Parshall along the Colorado River. I leave this one for you the reader to decide but…”

Dave’s friend, retired D&RGW employee Gerry Decker, relates in a letter to Dave about his father Dean who was a D&RGW conductor. Gerry says,
I don’t have too many 3600 stories. Dean was on the first one west with tonnage. He said the road foreman got off after a few tunnels and rode the caboose to Bond. He told Dean at Bond that he wouldn’t have ridden through another tunnel if they gave him what it cost new at the factory! He referred to it as ‘a miserable S.O.B!’ ... Frank Woodruff was on one west and they stopped someplace east of Bond. Don’t remember where. Frank went to the headend and the Hogger was passed out drunk. Frank told the fireman, who was promoted, to run the engine and he refused so Frank sent the head brakeman to the rear end and Frank ran the engine into Bond. He said, ‘That S.O.B., never thanked me for saving his job or even bought me a cup of coffee!’ 
Dean always remarked how bad they smoked. The company issued the crews some old WW1 gas masks and he said they were useless! The best they could do was keep a box of packing waste and a bucket of water in the cab. They would grab a wad of waste, dip it in the water, and cover their faces in it while going thru the tunnel. Dean also carried a small mirror with him to help pick cinders out of his eyes. He said he could get a cinder in his eye by just looking at a picture of a 3600. ... Dean said that there was a practice in helper service for other engines to be ahead of a 3600 because they put out too much smoke and heat that would about kill the crews on the smaller engine. He said they tried that at first but that didn’t last too long.” 
Author Dave Straight’s attached photo of the 3600’s and a 3700 being towed to their demise brought forth his comment, “The sound of hissing air being sucked into and blown out of the cylinder cocks was a sad moment as I stood and watched them fade away.”

3607 at the Pueblo Coaling Tower on Feb 12, 1956 Dave Straight Photo
3619 near Fraser 10-20 1956 Dave Straight3619 at Tabernash CO 10-20-1956 Dave Straight













 L 131 3609 at Tabernash Colorado  Sept 30, 1956 Dave Straight

3612 at Winter Park CO Sept 30, 1956 Dave Straight Photo


3609 at Winter Park CO Robert LeMessena Sept 1956 DPL-WHD Photo
3619 South of Tabernash CO  10-20-1956 Dave Straight Photo
3600 at Mitchell Curves with Train 35 on May 31 1941 R.H. Kindig, DL Straight Collection
3609 West of Malta CO with Train 33 with 71 Cars 3-24-1940 R.H. Kindig, DL Straight Collection
3606 and 1510 South of Littleton CO with 107 Cars 12-1-1940 R.H. Kindig, Dave Straight Collection
3612 at Tabernash Colorado Ready for Helper Service Sept 30, 1956, Dave Straight Photo

3602 at the West Portal of Tennessee Pass  3-24-1940 R.H.  Kindig  Photo Dave Straight Collection

Sadness On a Sunday Morning
L-131/2 class locomotives 3611, 3615, 3610, and L-105 class leader 3700 are pushed to their doom at the hands of a scrapper's torch. The culprit at the back is FT 5431 and 2 B-units on March 25, 1956 in Pueblo,CO. This is, to my knowledge, the last photograph of these steam engines, forever lost. Dave Straight Photo
"The sound of hissing air being sucked into and blown out of the cylinder cocks was a sad moment as I stood and watched them fade away."

Editor's note: Dave and John both have my deep personal gratitude for their patience in letting me put this article together. Having to work with my errors and delays is something that few can work with and it speaks to their great fortitude and generosity. I look forward to writing about the 3600s and hopefully, I will be able to use their incredible photographs and collections in the future! - SRW, ed.

8 comments:

  1. I greatly enjoy the article about the 3600's, they are among my favorite Rio Grande locomotives! And I enjoyed all the reminisces about the Moffat Road and "the Hill" - the Moffat is my favorite RR! Just one little peeve: in the editor's note, he implies "Corona Pass" is the former name for Rollins Pass. As an "East Sloper" (from Boulder), we always called it Rollins Pass. And since it was Rollins Pass before the DNW&P built over the pass and named the station at the summit "Corona", I think Rollins Pass is the older of the names. As with Rollinsville, the pass was named for John Q. A. Rollins back in the late 1800's. Before that, it was called "Boulder Pass", according to local sources. I could be wrong, but that is what I remember from growing up in the area.
    By the way, I greatly enjoy this website, so please don't take this too harshly - I'm just a grouchy old timer.

    ReplyDelete
    Replies
    1. Mr. Reynolds, Thank you for commenting! You're the reason this site here, and I greatly appreciate your feedback on both the article and the site! Your thoughts are well-put, and I agree with your assessment. By supplying both, I was trying to be helpful for folks looking for information using the unofficial name. But it absolutely is Rollins Pass.

      By the way, please watch for the new version of the article coming soon!

      Thanks again!

      Steve

      Delete
    2. Hey Dave, Steve & John,
      Thanks for your sight and article about the 3600's. As a Boulder and Nederland native now living in Germany I miss the "Moffat Road". Growing up in Nederland on cold nights with the right conditions you could here the SD-40 T-2s climbing up to Moffat Tunnel way over in Nederland.

      Any way my honary Grandfather Ralph MacAllister built a 12ton "model" of 3620 in Boulder as one man's tribute to the 3600's. All the pictures that I have been able to collect are on my website, take a look. The 3620 still exists somewhere back east but will probably never run due to the less common track gauge of 14 7/8ths gauge. Enjoy Thor
      http://www.thorsteamworld.com/photos/pv.asp?pid=225

      Delete
    3. Great and correct reply. Thank you Mr. Reynolds for your correction. Dave, Steve and I read and reread the article before it was published and we still missed it.

      Best,
      John H
      johnhill10@comcast.net

      Delete
    4. I'm glad I came back and looked at the final article - very well done, and those are some really nice photos!

      Delete
  2. The summer I turned eight (1952) my father was foreman of a work gang and our house car was parked at Tabernash. I spent the summer crawling all over the 3600's and was especially enthralled by the small cabin on the coal tender. Then one day I got a ride in the cab up to West Portal and back. Got to blow the whistle at each crossing!

    Back in Tabernash my mother immediately made me take a bath.

    ReplyDelete
  3. Frank, that sounds like one happy memory! I can remember my own bath and my kids baths after runs on the Durango & Silverton 30+ years apart! So hard to let go of that smell!

    ReplyDelete
  4. Were these engines Compound Mallets, or simple?

    ReplyDelete

Colorado Railroads is a site dedicated to preserving and presenting rail transportation in the Centennial State. Join the growing fascination with railroading and the lives and industries connected by a ribbon of steel across, over and through the Continental Divide!