Friday, July 24, 2015

D&RGW 3600 Locomotives




D&RGW 3600 LOCOMOTIVES

by Dave Straight and John Hill

3600’s. Mention that number series and those who follow the Denver and Rio Grande’s steam locomotive fleet will smile and fondly remember the 2-8-8-2 articulated giants, the world’s largest at their construction in 1927. Built by the American Locomotive Company, the first ten were class L131 numbered 3600 through 3609 and followed by class L132 numbered 3610 through 3619 built in 1930. 131,800 pounds of tractive effort, 63" diameter drive wheels, 26" x 32" cylinders and weighing in at 649,000 pounds. I remember being told that for every four scoops of coal into the firebox, one went straight up the smokestack.

Sadly all met with the scrapper's torch in 1955 and 1956, five in 1955, engines 3600, 3603, 3614, 3617 and 3618, the remainder in 1956 with none saved for posterity. Unfortunately, this was the same for all but one locomotive of the D&RG standard gauge steam fleet. 

Author Dave Straight met several engineers, hostlers and the like while out photographing the final days and hours of the great beasts. Here are a couple of anecdotes from the fellows he met as well as himself; 

“A hoghead named Alvie Powell, brought the first 3600 into Phippsburg, Colorado approximately in  1947. Alvie was an engineer who worked over the hill in the D&SL Days. He was quite a character, and he liked the 3600’s.”
“The last two 3600's under steam were: the 3609 and the 3619. Ironically the last 2 numbered engines in each class. Sadly enough, the last day they operated, was Oct. 27th,1956. They left Tabernash that afternoon. Joe Preiss and Flory Iacovetto, engineer and fireman respectively. Both were D&SL employees. Joe was a veteran from the days on the line over Corona/Rollins Pass." 
“About a week before their leaving Tabernash, A hostler let me up in the cab of the 3609."Just don't touch anything!" they told me. But I got to blow the whistle. I can't tell you how much of a charge I got out of that. Later on, we went over to a little diner across the highway. The cook had a little, black & white TV set on. It looked like a blizzard on Corona Pass! His rabbit ears antenna weren't much good. He started lamenting about those (censored) steam engines and how their steam generator "jacked up the reception." Plus the fact, some (censored) was blowing the whistle! Of course, needless to say I kept my mouth shut for a change. What a sight to see the 3609 pound out of Tabernash, tied to the tail of a Moffat Tunnel freight. ‘Twas quite a day.” 
“Another character said he had a 3600 running at 75MPH, that’s right, 75MPH between Flat and Troublesome. If you’re not familiar with those names they are between Kremmling and Parshall along the Colorado River. I leave this one for you the reader to decide but…”

Dave’s friend, retired D&RGW employee Gerry Decker, relates in a letter to Dave about his father Dean who was a D&RGW conductor. Gerry says,
I don’t have too many 3600 stories. Dean was on the first one west with tonnage. He said the road foreman got off after a few tunnels and rode the caboose to Bond. He told Dean at Bond that he wouldn’t have ridden through another tunnel if they gave him what it cost new at the factory! He referred to it as ‘a miserable S.O.B!’ ... Frank Woodruff was on one west and they stopped someplace east of Bond. Don’t remember where. Frank went to the headend and the Hogger was passed out drunk. Frank told the fireman, who was promoted, to run the engine and he refused so Frank sent the head brakeman to the rear end and Frank ran the engine into Bond. He said, ‘That S.O.B., never thanked me for saving his job or even bought me a cup of coffee!’ 
Dean always remarked how bad they smoked. The company issued the crews some old WW1 gas masks and he said they were useless! The best they could do was keep a box of packing waste and a bucket of water in the cab. They would grab a wad of waste, dip it in the water, and cover their faces in it while going thru the tunnel. Dean also carried a small mirror with him to help pick cinders out of his eyes. He said he could get a cinder in his eye by just looking at a picture of a 3600. ... Dean said that there was a practice in helper service for other engines to be ahead of a 3600 because they put out too much smoke and heat that would about kill the crews on the smaller engine. He said they tried that at first but that didn’t last too long.” 
Author Dave Straight’s attached photo of the 3600’s and a 3700 being towed to their demise brought forth his comment, “The sound of hissing air being sucked into and blown out of the cylinder cocks was a sad moment as I stood and watched them fade away.”

3607 at the Pueblo Coaling Tower on Feb 12, 1956 Dave Straight Photo
3619 near Fraser 10-20 1956 Dave Straight3619 at Tabernash CO 10-20-1956 Dave Straight













 L 131 3609 at Tabernash Colorado  Sept 30, 1956 Dave Straight

3612 at Winter Park CO Sept 30, 1956 Dave Straight Photo


3609 at Winter Park CO Robert LeMessena Sept 1956 DPL-WHD Photo
3619 South of Tabernash CO  10-20-1956 Dave Straight Photo
3600 at Mitchell Curves with Train 35 on May 31 1941 R.H. Kindig, DL Straight Collection
3609 West of Malta CO with Train 33 with 71 Cars 3-24-1940 R.H. Kindig, DL Straight Collection
3606 and 1510 South of Littleton CO with 107 Cars 12-1-1940 R.H. Kindig, Dave Straight Collection
3612 at Tabernash Colorado Ready for Helper Service Sept 30, 1956, Dave Straight Photo

3602 at the West Portal of Tennessee Pass  3-24-1940 R.H.  Kindig  Photo Dave Straight Collection

Sadness On a Sunday Morning
L-131/2 class locomotives 3611, 3615, 3610, and L-105 class leader 3700 are pushed to their doom at the hands of a scrapper's torch. The culprit at the back is FT 5431 and 2 B-units on March 25, 1956 in Pueblo,CO. This is, to my knowledge, the last photograph of these steam engines, forever lost. Dave Straight Photo
"The sound of hissing air being sucked into and blown out of the cylinder cocks was a sad moment as I stood and watched them fade away."

Editor's note: Dave and John both have my deep personal gratitude for their patience in letting me put this article together. Having to work with my errors and delays is something that few can work with and it speaks to their great fortitude and generosity. I look forward to writing about the 3600s and hopefully, I will be able to use their incredible photographs and collections in the future! - SRW, ed.

Saturday, July 11, 2015

OT: Walking In My Shoes

I don't go off-topic very often on this blog. You should get what you came here for. However, today is my birthday, and my wish is for you to take a few minutes and watch this video. I live this video every day, every week, every year since 2002. Please take a moment to walk in my shoes.



Video
Companion article in Palo Alto Online

Please feel free to contact me at editor@corailroads.com for my story.◊

Saturday, June 13, 2015

Ringling Bros and Barnum & Bailey Circus Train Passes Through Monument

On Monday evening, Walt Loevy caught the UP-led Ringling Bros, Barnum & Bailey circus train on it's way north through Monument on the west side of the grade with dusk approaching. Be warned: the flange noise on the curve is pretty loud! He catches up with it at Greenland, well after sunset for a final look. https://youtu.be/o9rn4klHKT8



By the way, the RBBX train--the longest privately owned train in the world--was featured on the single season of Extreme Trains. The hour long episode is here.◊

Monday, April 20, 2015

Cumbres & Toltec Scenic Announces Lease To Fully Restore T-12 Engine 168

Colorado Springs City Council has approved a lease of D&RG 168 by the Cumbres & Toltec Scenic Railroad for the purpose of full restoration to steam. It was initially proposed to the city in October and surprisingly--Nathan Holmes of DRGW.net called it "a rare moment of sanity and agreement"--they accepted. The Cumbres & Toltec Scenic's eventual success in restoring D&RGW 463, one of two surviving Mudhens, probably influenced the council's decision.

Denver & Rio Grande 168 In Antlers Park
Rio Grande 168 rests placidly under a thin blanket of snow on April 10, 2004.
Photo by Steve Walden*
The 168 is one of two surviving T-12 class narrow gauge ten-wheelers purchased by the Denver & Rio Grande Railroad in 1883 by Baldwin Locomotive Works in Philadelphia. The Rio Grande, having spent the previous two years in a frenzy of expansion needed a number of new narrow gauge locomotives to service the new lines. The other surviving engine, 169, rests in Alamosa, 30 miles north of the eastern terminus of the C&TS at Antonito.

Only a year after her presentation on Aug 27, 1939 (DPL)
The city will lease the locomotive to the railroad for 3 consecutive 15 year terms. This is inclusive of the time to take it apart and fully restore all parts that have corroded or wasted in the 77 years since it last saw service. The locomotive last saw a full cosmetic restoration completed in 1984 and has received periodic upkeep. As it has occupied the same location for nearly 8 decades, the locomotive's static display predates most buildings downtown.

June 13, 1943 Same engine and city but can you spot
all that's changed in less than 4 years?
Both photos: Otto Perry (courtesy DPL)
Most of the buildings, that is, with the exception of the Colorado Springs D&RG Depot, located across the street from Antlers Park. The close proximity of two of the oldest artifacts of Colorado's most extensive railroad has often resulted in their pairing in presentation in promotional and tourism material. The depot had for years served as a restaurant until a change of ownership and subsequent mismanagement forced it to close in 2011.

It is one of the ideas that for many years I had dreamed might one day come about. Could the city that was founded by Gen. Palmer only a year after his "baby road" one day find a way to return to steaming operation a locomotive that had such a history and connection to the city? I once thought it impossible, considering the difficulties of other organizations and other cities. Now, ...who knows what's next?◊

* On a personal note, this was one of my first digital photographs since 1997.

Tuesday, April 14, 2015

Ask the Editor: Can I Get From Vail to Denver Using Old Rails?

One of the first questions I received using the Ask the Editor form is from Tim S. of Sydney, Australia who asks,

"Is it possible to get from Vail to Denver using old rails?"

Vail ski area
Vail ski area, photo by David Benbennick
Here's my answer,
Hi Tim!

Good to hear from you via the site! I'd be happy to answer your question and if I don't quite answer your question or you have follow-up questions, please let me know!

First, a qualification. You don't mention the means you'd be traveling so I'll be just talking routes, not actual access to travel the routes. Any properties as well as your legal access to them are yours to discover and arrange, meaning none of what I say should be taken as an endorsement to pursue any activity, legal or otherwise.

Colorado's main expansion and consolidation of railroads happened between 1872 and 1917. Skiing, Vail's reason for being, did exist in a primitive way toward the end of that period, but didn't take off until after WW2. Vail as a town isn't much older than I am, incorporated in 1966, the ski area having been there for since 1962. So, if there was ever rail service near Vail, it would have been by coincidence, not by design of serving Vail.



The route over Vail Pass is the most direct candidate for a rail route to Denver. But it was completed in 1940 when the original US 6 was pushed through to Utah on it's way from Massachusetts to California. The grades over Vail Pass, at present, would be pushing the limits of rail technology. It would be very difficult without changing the route or the design of conventional rail travel.

The other direction out of the Vail Valley comes out at where Gore Creek flows into the Eagle River which is followed by the Tennessee Pass Route of the Rio Grande, the railroad that inspired the graphics for Colorado Railroads. It would be possible to follow that route all the way over Tennessee Pass and down the Arkansas River to Pueblo. That route has been out of service since 1997 (18 years this fall). Pueblo to Denver has been in active rail service since 1872, or thereabout. At present, Union Pacific owns both routes, in whole for TP and in part for the Front Range.

If you are interested in older routes, or in narrow gauge railroads that served nearly all the towns except Vail, I can go into further detail.

Keep Exploring!

Steve
If you have a question for the editor, please use the form in the near column or send an e-mail to editor@corailroads.com

Friday, April 10, 2015

POTD: Snowy Majesty From Greenland Ranch

Today we get a second shot from March 25 by Chris Paulhamus. When the weather is perfect like this, would you turn a second shot down? Taken an hour later than Monday's POTD, Chris notes that the wind has picked up a bit by blowing the heat shimmers across the center of the frame. Pikes Peak's east ridge remains in the clear. Had the auto focus been left unchecked, I wonder if we would be looking at the same picture.

UP 4591 Greenland 24 Mar 15
Photo of the Day: Chris Paulhamus
While the loco is more maize than Armour (mustard) yellow because of the diesel grime accumulating on its nose, 4591's winged shield brings a bit of the wild blue down to the rails. The perfectly dead on shot is another great contrast, especially the organic horizontal lines compared to the SD70-M's rigid steel lines. The meridian of light and dark is also carried by the landscape, owing to the difference in altitude.

Even on it's own, weather differences can make for a startling contrast, especially in spring when warmth along the Front Range doesn't reach the snowy climes at altitude. For the next two months, a trip to Greenland and Douglas County Open Space might be worth it for the practice. For best results, go in the morning, and bring your tripod and your scanner!◊

Last Minute Nudge Needed for Southwest Chief


ColoRail, the Colorado Rail Passenger Association, has requested the readers of Colorado Railroads help support a last minute effort to help preserve funding in Colorado's annual budget for rehabilitating the Southwest Chief. As many of you already know, Amtrak had been forced to look at re-routing the train mid route after BNSF reduced maintenance on its present route.

Now, with ColoRail, local communities, concerned citizens, more than one politician, and a TIGER on board, Amtrak says it will not re-route the train. Most importantly, this allows projects that had been put on hold in communities all along the line when they announced the possible re-route. This includes projects like La Junta's multimodal transportation hub. However, if Colorado is not able to come to the table with it's share, we may end up right back where we started.

So what's happened? Last night, Colorado's House of Representatives included the $1.5M needed in their budget for the year. Last week, the state Senate, by a vote of 17-18, failed to pass the request. What happens when the two bills don't match up? The 6 members of Joint Budget Committee meet in the next week to reconcile the differences between bills. If they go with the house version, Colorado makes it to the table with BNSF, Amtrak, Kansas and twelve SE Colorado communities that have all ponied up the funds to get back on track. If not, it puts a cloud of doubt over the whole process.

Jim Souby, President of ColoRail says they've already seen the impressive work of members and friends of the group. "Legislators have commented about how impressed they are by the number of calls and emails they have received." But now? "It's crunch time!"

Three key legislators on the Joint Budget Committee control the fate of the Southwest Chief. It's important for us to use today and the weekend to push as best we can for the Southwest Chief. "Can you help us with calls and emails today? I wouldn't be asking if this wasn't important," Souby explains.

Please take a moment today and contact the following legislators via email and phone. Leave a message if necessary. The key legislators are:


Represent with courtesy and respect. Personalize your message, but make sure to say that you want their support for funding the Southwest Chief in the state budget.

Here are a few other points that you can make to the legislators

  • Explain how we need to support rural Colorado. 
  • You support saving the Southwest Chief. Why do you support the Chief?
  • We're asking for $1.5 Million total in the budget this year. $1 Million as a local match to join Kansas, BNSF Railway, & Amtrak towards another Federal grant. The other half million will go towards studying the feasibility of connecting Pueblo and Walsenburg to the route
  • Local communities - in fact 12 - in Southeastern Colorado have already stepped up and paid a share. And, we were successful once receiving a Federal matching grant. ColoRail put in $1,000. If our small communities and advocates can step up, why can't Colorado?
  • Amtrak, the BNSF Railway, and Kansas have already spent millions on this project. Kansas put in $3 Million last year and plans on doing it again. Now it's Colorado's turn to show our support. We'll leverage all of our state and local dollars towards another Federal transportation grant and multiply our investment.

Thank you for your help saving passenger rail in Colorado!◊

Tuesday, April 7, 2015

POTD: Snowy Drama From Spruce Meadows

Award graphic
A photographer can use a zoom lens to compress distance. It is one of its basic functions, but when one uses it well, it tends to produce a result that gathers notice.

If you're going to work at getting it right, one particular place stands out. The Greenland Ranch is on the far side of the Palmer Lake Divide. Descending away from the divide, the park works like a focal ramp toward Pikes Peak, while still keeping (relatively) clear of the Rampart Range. The vast area of Spruce Meadows open space with trails allows for some flexibility in setting up your shot.

BNSF 9029 Spruce 24 Mar 15
Photo of the Day: Chris Paulhamus
On March 24th, photographer Chris Paulhamus used all 200 mm of his zoom lens to close the distance between Spruce (the next stop south of Greenland) and Pikes Peak. "The Mountain" is lit up fantastically with sun catching the fresh snow carried by winds off the cornices. Despite the train facing north, the morning light still allowed a higher F-stop value of 8.0 to keep both the locomotive and the mountain in sharp focus. The square-jawed, man-made brawn of BNSF 9029, an SD70ACe from EMD, contrasts with the silent splendor and natural beauty of the peak and foothills behind it. Great composition, superb elements, and technical ability make for a great Photo of the Day!

Stay tuned for another from Mr. Paulhamus later this week!◊

Friday, March 27, 2015

POTD - Portrait of a Silver Lady in Glenwood Canyon

Having ridden the Rio Grande Zephyr only once from Denver to Glenwood Springs, the weekend of its demise, I am no expert on the experience, but I can say that my trip on the last run of the last remnant of the Silver Lady far exceeded the usual type of magic that a train trip always seems to conjure.

Was it riding behind Grande gold F9s that--like the stainless steel cars behind them--were the last of their kind? Was it passing through the amazingly scenic Glenwood Canyon that inspired the creation of the very Vista-Dome I was riding in, condensing all the majesty inside my 9 year-old brain? Was it something else, or all of it together? I do not know.

Photo of the Day: Chris Nuthall
What I do know is that ever since that wild weather'd day in April 1983, I have never been able to find an experience that could rival such a fine ride aboard the Rio Grande Zephyr. Nearly two years prior to that day, photographer Chris Nuthall activated the shutter to capture this near-perfect, linear shot of the Zephyr in the canyon. What could be considered irony is that Mr. Nuthall was attempting to recreate a shot of the original California Zephyr. I think the RGZ looks just fine in her own right, don't you?◊

Friday, February 27, 2015

POTD - Grande Gold in Manitou Red Sandtone of Pueblo

I am no stranger to writing about cab units favorably. I have long loved the Rio Grande's parade of EMD F-units that roamed Colorado and Utah in the 50s and 60s. On the other hand, it took me a long time to become a fan of Rio Grande's Alco PA and PB diesel locomotives.

Arguably, they are an ugly duckling when compared with her contemporaries. The Alco's cab is broad and flat, it's windows angular. What could have been a smooth, rounded nose is marred by a square grill housing around the pilot light. Nonetheless, the Alco is not without her charm. The cab has a softening line along her grills and a land yacht-like gracefulness that could be likened as a Cadillac to EMD's Chevrolet-esque appearance, a not-completely unfounded comparison, considering EMD's ties to General Motors.

Photo of the Day: Steve Patterson


So why is an Alco PA our photo of the day? Quite frankly, because it's time I recognize the worthwhile love of Alco fans. The PA's lines and the radiant Rio Grande colors of the matched (mostly) consist are especially beautiful, balanced against the Manitou Red Sandstone of the Pueblo depot and a spotless Colorado summer sky are so memorable, that at the time of this writing, I haven't seen this picture in a week and I can still describe it with vivid clarity. That's a photo worth keeping!

Thanks to Mr. Patterson for sharing with us!◊

Monday, February 16, 2015

POTD: Grande Gold Set In White Gold

Snow is certainly fitting today's photo as most of the state and especially the high country is coping with a fresh deposit of the white stuff. Of course, it's white gold to the ski areas, who just saw their high-drift mark of the 2015 ski season, Presidents' Day Weekend. If you haven't gotten up to the slopes, what are you waiting for? A Ski Train?

On the last day of January, 1966, it was a different sort of ski train that was kicking up the fallen snow in Fraser Canyon. You can almost smell the wind whipping the diesel and blowing snow crystals freezing your nose. Photographer Steve Patterson leans out the fireman's side of the locomotive cab to grab a shot of the consist as they blast through a turn on the way to Craig with the Yampa Valley Mail.

Photo of the Day: Steve Patterson
Of the nature of the train's ski element, veteran photographer Steve Patterson notes,
The last two cars carried skiers to Winter Park, and those cars will be handed off to counterpart Train 10 wherever they meet, and then pick up those skiers and take them back to Denver. The round-end dome Observation car was acquired from the C&O.
The dome observation car was certainly different than the all-silver sides of the California Zephyr. Even amongst clerestory roofed pullmans painted in matching Grande gold, it's hard to hide a vista dome in her native territory.

Sharp-eyed readers will note that it's not just any cab unit pulling the train. Perhaps it's a hint of a theme for later this week?◊

Friday, February 13, 2015

POTD: Big Ten in '15

Perhaps no place better symbolizes the challenge faced by railroads heading west from Denver than Big Ten Curve located on the former Denver & Salt Lake Railroad as it climbs from the western suburbs toward the low foothills of the Front Range. Almost as if nature or nature's God knew what was needed for David H. Moffat's railroad to reach the lowest rung of the Rockies, a low mesa juts out of the ramparts just south of Rocky Flats.

Big 10 Curve from the southwest
Photo of the Day: Mike Danneman
Today's Photo of the Day, from seasoned veteran photographer Mike Danneman, shows a BNSF manifest freight descending the Big Ten Curve towards Denver using BNSF's trackage rights over the Union Pacific's Moffat Route. Mr. Danneman managed to capture this photo only earlier this week with a couple of warm days that afforded him and his associate Rich Farewell unusual mid-winter access to a hiking trail overlooking Big Ten. It is likely this same trail that afforded Ralph Parsons almost the identical exposure for Robert A. LaMassena's signature work, Colorado's Mountain Railroads.

In the caption for Parsons' photograph, Robert LaMassena says of Big Ten,
Perhaps the most difficult location was the transition from the western end of the prairie to the eastern foot of the Rocky Mountains. This was accomplished by wrapping the track around a small mesa to form a bent hairpin curve. Six miles of track lay between two points only 1 1/2 miles apart, on the ground, but displaced vertically 600 feet.
In 2015, Big Ten is a convergence of geography, technology and more than a century of railroad men and machines working to lift countless tons from prairie to the crest of the continent!◊